Installing the Playstation 2 Eye Toy as a Web cam

Firstly flip your EyeToy over and look at the bottom of the stand, you will need to check the Sony Part ID, so you can use the appropriate Product ID code for the drivers.

Download the appropriate drivers for your EyeToy

Download the D-Link DSB-C310 (Rev B1) drivers for all EyeToy's

00030 or 00031

Installation WINXP/2K

1.] Download the correct drivers for your EyeToy from above and extract them
2.] Plug your EyeToy into your USB port

The new hardware installation wizard will popup on the screen

3.] Select the (Advanced) option then click next

4.] Select "Search for the best driver in these locations"
5.] Check Include this location in the search: click browse and point
it to where you extracted the edited drivers then click next

Windows will go off searching for your drivers

If successful it will change to this screen and continue the installation

You will be presented with a prompt screen, select "Continue Anyway"

Next a small box full of gibberish will popup on your screen press "OK"

You will now be looking at the configuration screen for the drivers

Answer Yes to this screen (unless you think you know better)

Installation is now complete

Good Luck and Enjoy the Eye Toy as a Web Cam